Solar control unit for small to mid-sized solar and heating systems with outputs and inputs for heat quantity meters (volume measuring instrument required), web-connected (module required), as well as actuation of high-efficiency pumps. 10 pre-configured systems available. Numerous functions such as drainback, thermal disinfection and blocking protection can be connected. 2 additional micro buttons for fast access to manual mode and holiday function. Integrated multi-coloured control LED for differentiated message-display of various system conditions. Automatic function check as per VDI guideline 2169.
Overview:
Further informations:
Duplex solar control unit for small to mid-sized solar and heating systems, fitted with outputs and inputs for heat quantity meters (volume measuring instrument or VFS sensor required), web-connected (module required), actuation of high-efficiency pumps and MicroSD card slot and LAN and mini-USB connection. 27 pre-configured systems available. Numerous functions such as drainback, booster, timer, bypass, external WT, twin pump, thermal disinfection, zone charging and blocking protection can be connected, freely-programmable function blocks. 2 additional micro buttons for fast access to manual mode and holiday function. Integrated multi-coloured control LED for differentiated message-display of various system conditions. Automatic function check as per VDI guideline 2169.
Overview:
Further informations:
Multiplex solar control unit for multi-tank and complex solar and heating systems, fitted with outputs and inputs for heat quantity meters (volume measuring instrument or VFS sensor required), web-connected (module required), actuation of high-efficiency pumps and MicroSD card slot. Pre-configured systems for up to 4 tank systems and possibility to control a weather-compensating heating circuit are available. Numerous functions such as drainback, booster, timer, bypass, external WT, twin pump, thermal disinfection, time-controlled thermostat function, zone charging and blocking protection can be connected, freely-programmable function blocks. Expandable by up to 2x multiplex EM (of which 21 are temperature inputs and 15 relay outputs), e.g. for additional weather-compensating heating circuit. Automatic function check as per VDI guideline 2169.
Overview:
Further informations:
The multiplex expansion module provides 5 additional relay outputs and 6 additional sensor inputs, can be used for all optional functions of the Multiplex and can control its own heating circuit. Up to 2 expansion modules can be connected to the Multiplex; the controller then has a total of 15 relay outputs and 21 sensor inputs. Up to 2 weather-compensating heating circuits with their individual room thermostats can be controlled. by combining the Multiplex with the expansion module.
Overview:
Further informations:
With this auxiliary module, large quantities of data (e.g. measurements and balance values for the solar system) can be recorded over extended periods. Using the TiSUN-Control Service-Portal, the system can be accessed with just a few clicks (without knowledge of networks and without complicated router configuration). An SD card can also be used to transfer the recorded data from the internal memory of the AD webmodule to a PC.. The AD webmodule is suitable for use with all TiSUN controllers. It can be directly connected to a PC or router for remote querying, facilitating convenient system monitoring for yield control or for extended diagnosis of failure situations.
Overview:
Further informations:
The multiplex expansion module provides 5 additional relay outputs and 6 additional sensor inputs, can be used for all optional functions of the Multiplex and can control its own heating circuit. Up to 2 expansion modules can be connected to the Multiplex; the controller then has a total of 15 relay outputs and 21 sensor inputs. Up to 2 weather-compensating heating circuits with their individual room thermostats can be controlled. by combining the Multiplex with the expansion module.
Overview:
Further informations:
TiSUN-Control is a service portal that allows a solar system to be reached via the internet without any configuration being required. There is therefore no need to configure the DSL router. To use the TiSUN-Control Service, the system must be fitted with an AD webmodule or and ES webmodule. The webmodule can be logged into the system after registering at control.tisun.com. TiSUN-Control allows users to access the data of their solar systems from anywhere in the world using a normal web browser. No additional software and no special app is required to use it. All that is required is a configured access to the TiSUN-Control Service, an internet browser and an internet connection. For instance, many common mobile end device are supported. The RPT software is also available for free download at the portal to configure the controller via internet.
Overview: