Products

Solar components

Solar control units

Simplex solar control unit

Solar control unit for small to mid-sized solar and heating systems with outputs and inputs for heat quantity meters (volume measuring instrument required), web-connected (module required), as well as actuation of high-efficiency pumps. 10 pre-configured systems available. Numerous functions such as drainback, thermal disinfection and blocking protection can be connected. 2 additional micro buttons for fast access to manual mode and holiday function. Integrated multi-coloured control LED for differentiated message-display of various system conditions. Automatic function check as per VDI guideline 2169.


Overview:

  • 3 relay outputs (incl. 1 floating low-voltage relay)
  • 4 inputs for temperature sensors Pt1000, Pt500 or KTY
  • 1 pulse input for V40
  • 2 PWM outputs for speed-controlled actuation of high-efficiency pumps
  • Can be connected to the web (module required)
  • 10 pre-configured basic systems selectable
  • Automatic function check as per VDI 2169


Further informations:

  • 3 relay outputs (incl. 1 floating low-voltage relay)
  • 4 inputs for temperature sensors Pt1000, Pt500 or KTY
  • 1 pulse input for V40

Duplex solar control unit

Duplex solar control unit for small to mid-sized solar and heating systems, fitted with outputs and inputs for heat quantity meters (volume measuring instrument or VFS sensor required), web-connected (module required), actuation of high-efficiency pumps and MicroSD card slot and LAN and mini-USB connection. 27 pre-configured systems available. Numerous functions such as drainback, booster, timer, bypass, external WT, twin pump, thermal disinfection, zone charging and blocking protection can be connected, freely-programmable function blocks. 2 additional micro buttons for fast access to manual mode and holiday function. Integrated multi-coloured control LED for differentiated message-display of various system conditions. Automatic function check as per VDI guideline 2169.


Overview:

  • 4 relay outputs (incl. 1 floating low-voltage relay)
  • 4 inputs for temperature sensors Pt1000, Pt500 or KTY
  • 1 input for analogue Grundfos Direct Sensor™
  • 1 pulse input for V40 (can be switched to temperature sensor input Pt1000, Pt500 or KTY)
  • 2 PWM outputs for speed-controlled actuation of high-efficiency pumps
  • Can be connected to the web (module required)
  • MicroSD card slot, LAN and mini-USB connections
  • 27 pre-configured basic systems selectable
  • Automatic function check as per VDI 2169


Further informations:

  • Complete package incl. 2 collector sensors and 2 tank sensors
  • Combinable with flow rate counter and flow sensor for heat metering
  • Comprehensive range of accessories available

Multiplex solar control unit

Multiplex solar control unit for multi-tank and complex solar and heating systems, fitted with outputs and inputs for heat quantity meters (volume measuring instrument or VFS sensor required), web-connected (module required), actuation of high-efficiency pumps and MicroSD card slot. Pre-configured systems for up to 4 tank systems and possibility to control a weather-compensating heating circuit are available. Numerous functions such as drainback, booster, timer, bypass, external WT, twin pump, thermal disinfection, time-controlled thermostat function, zone charging and blocking protection can be connected, freely-programmable function blocks. Expandable by up to 2x multiplex EM (of which 21 are temperature inputs and 15 relay outputs), e.g. for additional weather-compensating heating circuit. Automatic function check as per VDI guideline 2169.


Overview:

  • 5 relay outputs (incl. 1 floating low-voltage relay)
  • 8 inputs for temperature sensors Pt1000, Pt500 or KTY
  • 2 inputs for analogue Grundfos Direct Sensors™
  • 1 input for solar cell SZ
  • 2 pulse inputs for V40 (can be switched to temperature sensor input Pt1000, Pt500 or KTY)
  • 4 PWM outputs for speed-controlled actuation of high-efficiency pumps
  • Can be connected to the web (module required)
  • SD card slot
  • Expandable by up to 2x multiplex EM (of which 21 are temperature inputs and 15 relay outputs)
  • Automatic function check as per VDI 2169

 

Further informations:

  • Complete package incl. 2 collector sensors and 4 tank sensors
  • Combinable with flow rate counter and flow sensor for heat metering
  • Combinable with pressure sensor
  • Combinable with radiation sensor
  • Heating circuits controllable by atmospheric conditions
  • Expandable with up to 2 modules EM
  • Comprehensive range of accessories available

 

Multiplex EM expansion module

The multiplex expansion module provides 5 additional relay outputs and 6 additional sensor inputs, can be used for all optional functions of the Multiplex and can control its own heating circuit. Up to 2 expansion modules can be connected to the Multiplex; the controller then has a total of 15 relay outputs and 21 sensor inputs. Up to 2 weather-compensating heating circuits with their individual room thermostats can be controlled. by combining the Multiplex with the expansion module.

Overview:

  • Expands the controller by 5 relay outputs and 6 sensor inputs
  • LCD display with 7 segment display
  • Function check
  • Sliding switch 0 auto I
  • Can be used for all optional functions of the Multiplex
  • Little installation effort, set at the controller
  • VBus® data interface



Further informations:

  • Complete package incl. connection wires for Multiplex connection
  • i.e. for additional heating circuits controlled by atmospheric conditions

Webmodule AD

With this auxiliary module, large quantities of data (e.g. measurements and balance values for the solar system) can be recorded over extended periods. Using the TiSUN-Control Service-Portal, the system can be accessed with just a few clicks (without knowledge of networks and without complicated router configuration). An SD card can also be used to transfer the recorded data from the internal memory of the AD webmodule to a PC.. The AD webmodule is suitable for use with all TiSUN controllers. It can be directly connected to a PC or router for remote querying, facilitating convenient system monitoring for yield control or for extended diagnosis of failure situations.


Overview:

  • Displays system conditions
  • Yield control 
  • Easier diagnosis of malfunction
  • Internet access using TiSUN-Control – without complicated router configuration
  • Comfortable configuration using RPT software
  • Export function for further data processing in spreadsheet programs
  • Direct connection for PC or router for remote querying



Further informations:

  • Complete package incl. SD-card, LAN- and VBus-connection wires as well as RPT-Software
  • Web-access for the control unit via control.tisun.com

 

Webmodul EX

The multiplex expansion module provides 5 additional relay outputs and 6 additional sensor inputs, can be used for all optional functions of the Multiplex and can control its own heating circuit. Up to 2 expansion modules can be connected to the Multiplex; the controller then has a total of 15 relay outputs and 21 sensor inputs. Up to 2 weather-compensating heating circuits with their individual room thermostats can be controlled. by combining the Multiplex with the expansion module.


Overview:

  • Expands the controller by 5 relay outputs and 6 sensor inputs
  • LCD display with 7 segment display
  • Function check
  • Sliding switch 0 auto I
  • Can be used for all optional functions of the Multiplex
  • Little installation effort, set at the controller
  • VBus® data interface



Further informations:

  • Complete package incl. SD-card, LAN- and VBus-connection wires as well as RPT-Software
  • Communication with building management systems possible
  • Web-access for the control units via control.tisun.com

TiSUN-Control Service-Portal

TiSUN-Control is a service portal that allows a solar system to be reached via the internet without any configuration being required. There is therefore no need to configure the DSL router. To use the TiSUN-Control Service, the system must be fitted with an AD webmodule or and ES webmodule. The webmodule can be logged into the system after registering at control.tisun.com. TiSUN-Control allows users to access the data of their solar systems from anywhere in the world using a normal web browser. No additional software and no special app is required to use it. All that is required is a configured access to the TiSUN-Control Service, an internet browser and an internet connection. For instance, many common mobile end device are supported. The RPT software is also available for free download at the portal to configure the controller via internet.


Overview:

  • Your solar and heating system in the internet – without complicated router configuration
  • Very easy using AD or EX webmodule
  • Visualisation also provided for all common module end devices
  • System access via web browser - no software installation required
  • Display of data data curves (trends) as live-data display or as a diagram
  • Data can be published with a click when required
  • Individual filters for made-to-measure display of data
  • RPT configuration software available as a free download